<rp id="rb4h4"><rp id="rb4h4"><dl id="rb4h4"></dl></rp></rp>


  • <rp id="rb4h4"></rp>

    PRODUCTION FACILITY
    KARALTAY SCIENTIFFIC INSTRUMENTS CO., LTD.
    Room 1015,Beijing Research Institute of Meha-
    nical & Electrical Technology,No.18 Xueqing Road,
    Haidian District,
    Beijing,P.R. China 100083
    Tel:+86-10-62023948
    Fax:+86-10-62016954
    E-mail:sals@karaltay.com

    High-Frequency Fusion System

    Sample preparation is the main deviation source for XRF measurement. With high temperature, the fusion system can fuse samples into even glass slide. It can reduce the sample error arisen from mineral effect, particle effect and unevenness. Fusion system has been widely used as a necessary device for XRF sample preparation. High-frequency induction fusion system has some features, like good repeatability, high precision, short sample preparation time, low cost and so on. It has been widely used in iron & steel, metallurgical, cement, inspection, chemical and other industries.

     

    Model:

    K2F

    K2F+

    K4F

    K4F+

    K8F

     

    Features:

        Quick sample preparation, 6-10 minutes for every sample preparation including cooling time.

        Moulding method to lower crucible cost.

        Manual or automatic moulding can be selected by customers.

        Automatic moulding can decrease interference.

        Shaking and pouring can let sample mix completely.

        Applying PLC controller with life more than 100000 hours.

        Touch-screen is easy for operation.

        Safe operation with exhaust system.

        Without preheating or keeping temperature.

        Real-time infrared temperature measurement.

     

    Indicators

    Model

    Sample No.

    Moulding mode

    Dimensions (mm)

    Power

    Weight

    K2F

    1

    Manual- moulding mode

    Single-crucible & single-mould

    660X700X530

    4KW

    40Kg

    K2F+

    1

    Automatic- moulding mode

    Single-crucible & single-mould

    660X700X530

    4KW

    40Kg

    K4F

    2

    Manual- moulding mode

    Double-crucible & double-mould

    660X700X530

    6KW

    40Kg

    K4F+

    4

    Automatic- moulding mode

    Double-crucible & double-mould

    780X760X580

    6KW

    60Kg

    K8F

    4

    Automatic- crucible bottom moulding

    780X760X580

    4KW

    60Kg

     

    Sample treatment:

        Oxide

        Cement, carbonate, silicate, ceramics, furnace blast, glass, sand

        Geological samples

        Sulfide

        Bauxite, fluoride

        Catalyst

        Pure metal, ferroalloys and other alloys

     

    Ů2